Filter
Top Products
DVS 510 Series • Remote Configuration and Control 68
X8*
= Time (in 10-ms increments) to wait 2 through 32767
between characters before Default = 2, or 20 ms
terminating the connection
X8(
= Hardware (MAC) address 00-05-A6-xx-xx-xx
X9)
= Subnet mask nnn.nnn.nnn.nnn
(Leading zeros in each of the four fields are optional
for setting values and are suppressed in returned
values.
Factory default subnet mask: 255.255.0.0
X9! = Message length, delimiter value, nL = Length of message to be received. For the length,
or byte count (via the serial port). n = byte count (1 through 32767; default is 0).
(This parameter is optional.) nD = Delimiter value
X9@
= Verbose mode 0 = clear or none (default for Telnet connection)
1 = verbose mode (default for RS-232 and RS-422)
2 = tagged responses for queries
3 = verbose mode and tagged responses for queries
NOTES: • If verbose mode is enabled (modes 1 and 3), you are shown all actions (commands)
initiated by other users via the web, RS-232/RS-422, or the front panel. (This does not
include information requests.)
• If tagged responses are enabled (modes 2 and 3), the unit responds to all read or
view commands with the command text as well as the value or information requested
For example, the View Name command E CN } returns Ipn • X8@ ] instead of
the name only (X8@).
X9#
= Priority status for receiving timeouts 1 = use Send data string parameters (if they
exist) (default).
2 = use Configure receive timeout command
parameters instead.
X9%
= Baud rate 9600 (default), 19200, 38400, or 115200
X9^
= Parity Odd, Even, None (default), Mark, Space (Only the
first letter is required.)
X9&
= Data bits 7 or 8 (default)
X9*
= Stop bits 1 (default) or 2
X9(
= Port type 0 = RS-232 (default)
1 = RS-422
X10)
= Flow control Hardware, Software, None (default) (Only the first
letter is required.)
X10!
= Data pacing Specified in milliseconds between bytes:
0000 through 1000 (default = 0 ms)
X10@
= Password 12 characters maximum
NOTE: The following characters are invalid in passwords:
{space} + ~ , @ = ` [ ] { } < > ‘ ’ “ ” ; : | \ and ?.
X10#
= Daylight saving time 0 = off or ignore
1 = USA (begins second Sunday in March and ends rst
Sunday in November.)
2 = Europe (Begins last Sunday in March and ends
last Sunday in October.)
3 = Brazil (Begins third Sunday in October and ends
third Sunday in February.)
X10$
= Event number 0 through 99 (The event must be running.)