Filter
Top Products
DVS 510 Series • Remote Configuration and Control 73
Command
ASCII Command
(Host to Scaler)
Response
(Scaler to Host)
Additional Description
IP Setup Commands (continued)
Set verbose mode
E X9@ CV } Vrb X9@ ] Set verbose mode X9@. For X9@:
0 = verbose mode and tagged
responses disabled
1 = verbose mode
2 = tagged responses for queries
3 = verbose mode and tagged
responses for queries
Default is 0 for Telnet
connections and 1 for
RS-232 or RS-422 control.
NOTES: • If verbose mode is enabled (modes 1 and 3), you are shown all actions (commands) initiated by other users via
the web, RS-232, RS-422, or the front panel. (This does not include information requests.)
• If tagged responses are enabled (modes 2 and 3), the unit responds to all read or view commands with the
command text as well as the value or information requested. For example, the view name command E CN }
returns Ipn • X8@ ] instead of the name only (X8@).
View verbose mode
E CV} X9@ ]
Set broadcast mode
E X12%,X8$ } Bmd X12%,X8$ ]
Set broadcast mode to default
address
E X12% EB } Bmd X12%,X8$ ]
Clear broadcast mode
E 0EB } Bmd000,X8$ ]
View broadcast mode
E EB } Bmd X12%,X8$ ]
Set broadcast port and MAC
address
E X7@ * X13# * X13$ PB }
Bpt X7@ * X8( ] X7@ = UDP outgoing port
X13#*X13$ = MAC address for
UDP unicast transmissions
Set event target IP address
E X10$,X8$ ID } Edi X10$ * X8$ * X7@ ]
X10$ = event number (The event
must be running.)
X7$ = 0–99
Set event target TCP port
E X10$,X7@ ID } Edi X10$ * X8$ * X7@ ]
Set event target IP address
E X10$ ID } X8$ * X7@ ]
Password and Security Settings
Set administrator password
24
E X10@ CA } Ipa • X10( ]
Set administrator access
password X10@.
X10@ = 4 to 12 alphanumeric
characters. The password is case
sensitive. Special characters
(spaces or symbols) are not
allowed.
X10( = password.
If a password
exists, the unit responds with
the password (RS-232 or RS-422
connection) or 4 asterisks
(****) (IP connection). If there
is no password, the response is
empty.
View administrator password
24
E CA } X10( ]
Reset (clear) administrator
24
password
E • CA } Ipa • ]
Clear or remove all passwords
(administrator and user).