Filter
Top Products
MMX 32 VGA MTP • Installation and Operation 11
System Reset
To clear all user settings and reset the switcher to its factory settings, press and hold the
input 3 button for output 1 while you power up the switcher (see figure 11). Continue to
hold the button while the switcher lights the front panel LEDs sequentially from left to right.
The default settings are: input 1 is tied to both outputs, the front panel is not locked, and all
states are unmuted.
MMX 32 VGA MTP
OUTPUT 1
213
OUTPUT 2
213
Press and hold this button while
powering up the switcher.
Figure 11. Press and Hold to Reset the Switcher
Audio Switching
When you select an input by pressing a front panel selector button, the audio and video
signals from that input are routed together to the appropriate output.
• The MMX 32 VGA MTP also features audio breakaway through the Extron Simple
Instruction Set or the Extron Universal Switcher Control Program (see “Remote
Control” on page 12 for details). When audio breakaway is active, the front panel LED
corresponding to the audio source flashes, while the LED corresponding to the video
source lights steadily.