Filter
Top Products
MMX 32 VGA MTP • Reference Information 24
Reference
Information
This section covers the following topics:
• Specifications
• Part Numbers
Specifications
Video
Routing .......................................... 3 x 2 matrix
Gain ............................................... Unity
Protocols ........................................ ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet
Bandwidth ..................................... 300 MHz (-3 dB), fully loaded
0 – 10 MHz ............................. no more than +0.1 dB to -0.1 dB
0 – 130 MHz ........................... no more than +2 dB to -0.1 dB
Crosstalk ........................................ -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz
Switching speed ............................. 200 ns (max.)
Video input
Number/signal type ........................ 3 universal multiformat RGBHV, RGBS, RGsB, RsGsBs, component video, S-video,
or composite video
Connectors .................................... (3) 15-pin HD female
Nominal level ................................. 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p and R-Y/B-Y of component video for C of S-video
Minimum/maximum levels .............. Analog: -0.5 V to 2.0 Vp-p with no offset at unity gain
Impedance ..................................... 75 ohms
Horizontal frequency ...................... 15 kHz to 145 kHz
Vertical frequency ........................... 30 Hz to 170 Hz
Return loss ..................................... <-42 dB @ 5 MHz
DC offset (max. allowable) ............. 4.0 V
Video output
Number/signal type ........................ 2 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, composite video
Connectors .................................... (1) 15-pin HD female
1 RJ-45 female (for proprietary analog signals to be received by MTP U R Series,
MTP RL 15HD A, MTP RL 15HD A SEQ)
Nominal level ................................. 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p and R-Y/B-Y of component video for C of S-video
Minimum/maximum levels .............. 0.3 V to 2.0 Vp-p
Impedance .................................... 75 ohms
Return loss .................................... <-30 dB @ 5 MHz
DC offset ....................................... <±20 mV with input at 0 offset