Filter
Top Products
MMX 32 VGA MTP • Remote Control 18
Windows®-Based Control Program
The Universal Switcher Control Program is compatible with Windows 98 and later, and
provides remote control of the input selection for each output (including video/audio
breakaway), audio gain and attenuation adjustments, and front panel lock out.
Updates to this program can be downloaded from the Extron Web site
(www.extron.com).
Installing the software
The program is contained on the Extron Software Products DVD. Install the software as
follows:
1. Insert the DVD into the drive. The installation program should start automatically. If it
does not self-start, run Launch.exe from the DVD.
The Extron software DVD window appears (figure 16).
Figure 16. Software DVD Window
NOTE: Either select the product tab (page) and then select the switcher from the drop-
down list or from the group names; or, alternatively, select the software tab and
then select the switcher software listed on the page. Steps 2 through 4 detail
accessing the software page.
2. Click the Software tab (figure 16).
3. Scroll to the Universal Switcher Control Program and click Install (figure 17).
Figure 17. Software Installation