Filter
Top Products
MMX 32 VGA MTP • Remote Control 19
4. Follow the on-screen instructions. The program prompts you to choose to either “run”
or “save” the software. Click Run for the default installation, which creates a
C:\Program Files\Extron\UNIVSW folder and places three files (UNIVSW.exe,
UNIVSW.hlp, and UniversalSwitch_update.exe) into the folder. A shortcut for the Control
Program may also be placed on the PC Desktop for quick access.
Click Save if you want to save the software installer on your PC.
NOTE: In some installations, you may be prompted to restart your PC before you can
use the software.
Using the software
To run the software after it has been installed, follow these steps:
1. Double-click the Universal Switcher Control Program icon in the Extron
program group, or on the PC Desktop.
2. Click the COM port that is connected to the remote connector of the
switcher.
3. Click OK. The Control Program window displays the selected inputs for each
output (figure 18).
Figure 18. Universal Switcher Control Program Window