FARGO electronic 76502 Printer User Manual


 
59
Printer Preferences (sys:Prefs/Printer)
Use the Prefs/Printer program to select
ÒPrimeraProÓ as the current printer and set the
other gadgets as described below. Other
PrimeraPro files may be visible on the list but
should not be selected.
Printer Type: PrimeraPro
Printer Port: Parallel
Paper Type: Single
Paper Format: U.S. Letter = A (8.5Ó x 11Ó).
U.S. Legal = A-Long (A-size
with tabs).
Narrow Tractor = A4
(210mm x 297mm).
Wide Tractor = A4-Long
(A4-size with tabs).
Other options are reserved
and should not be used!
Note: Use PPCI interface for
paper size selection.
The other gadget settings do not affect PrimeraPro
graphics printing and should be left as is for text
printing.
For more information about the printable area for
each paper size refer to page 24 of this manual. This
will help you determine which paper size to use for
your printing needs.
Graphics Printer Preferences
(sys:Prefs/PrinterGfx)
Use the Prefs/PrinterGfx program to set the
graphics printing parameters. The settings below
are most common when printing to the PrimeraPro,
although they are not required to be set as shown.
Different applications may use or allow changes to
these settings at print time. If a setting such as
Density (or Resolution for some applications) is not
seen within the applicationÕs print box, you may
assume that it is using the Prefs setting. Prefs
settings must be saved prior to entering the
applicationÕs print box.
C. Using
PrimeraProÕs
Preferences
Printer Driver