Filter
Top Products
FS-8700-49_Data_Aire_DAP Page 32 of 48
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll_Free: 888-509-1970 email: support@FieldServer.com
Appendix B.10. Advanced Map Descriptor: Example 6 – Turning Dap’s On/Off.
This Map Descriptor sends a Dap-Config command to the DAP device. The Map Descriptor extracts two consecutive values from
the Data Array the first value being the zone number and the second the inhibit value. Additional information is provided in 0.
// client Side Map Descriptors
Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_name, Address, Length, DA_Func, Scan_Interval
INH_04, DA_WR_01,
0, WRBC, Node_A, 0, 2, Dap-Config, 5
Two elements of this array are used. The value found at offset 0 is the zone
number. The value found at offset 1 is the inhibit code which is used to
inhibit/run units.