Filter
Top Products
FS-8700-49_Data_Aire_DAP Page 36 of 48
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll_Free: 888-509-1970 email: support@FieldServer.com
Message Description Discussion
Map Descriptor= <%s>
permitted
.5
DAP:#11
Err. Invalid Daire
function (%d) .Map
Descriptor= <%s>
DAP:#12
Err: Invalid Daire field
(%d) .Map Descriptor=
<%s>
The value of the DA_Function parameter specified in
the CSV file cannot be recognized by the driver. Read
Appendix B.2 for more information.
6
DAP:#13
Err. Invalid Daire
method (%d) .Map
Descriptor= <%s>
The value of the DA_Method parameter specified in the
CSV file cannot be recognized by the driver. Read
Appendix B.4 for more information.
6
DAP:#14
Err. Map Desc. Cant
understand function=
%d <%s>
The value of the DA_Function parameter specified in
the CSV file cannot be recognized by the driver. Read
Appendix B.2 for more information.
6
DAP:#15
Err. Map Desc. Cant
understand id= %d
<%s>
The value of the DA_Field parameter specified in the
CSV file cannot be recognized by the driver. Read
Appendix B.3 for more information.
6
DAP:#16
Err. Unknown
Response= %X( h)
DAP:#17 Err. Unknown Query
DAP:#18
Err. Unknown
Command
DAP:#19
Err. Unknown Msg
Type
A message has been received that cannot be
recognized. If this error occurs repeatedly, make a log
file and report the error to FST. If the error occurs
occasionally it may be indicating an occasional corrupt
message and may be ignored.
DAP:#20
Writing before Unit
Type is known.
If you see this message printed report the fact to FST
immediately.
DAP:#21
Err. Cant write this
function= %c. Map
Descriptor= <%s>
Only certain data is writable. See Section Appendix A.2
for more information.
5
DAP:#22
FYI. Write abandoned.
Map Descriptor=<%s>.
ch=%d j=%d off=%d
dev=<%s>
It is not possible to write to a DAP device before it has
been read successfully. This message arises if the
device has been read but some data contained in the
read is invalid. The driver is preventing the invalid data
being written back to the device. If this message only
occurs once or twice after the FieldServer is restarted, it
may be ignored. If the message occurs repeatedly then
take a log file and report the error to FST
DAP:#23
DAP:#23a
FYI. Write abandoned.
Read incomplete. Will
retry. Map Descriptor=
<%s>
It isn’t possible to write to a DAP device before it has
been read successfully. If this message only occurs
once or twice after the FieldServer is restarted, it may
safely be treated as for information only. If the message
occurs repeatedly then the configuration may need
changing.
DAP:#24
Err. Rev-Translate:
Unknown Method.
Report this error to FST providing a copy of your CSV
file.
6
Edit the CSV file and reset the FieldServer for the changes to take effect.