Filter
Top Products
FS-8700-49_Data_Aire_DAP Page 35 of 48
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll_Free: 888-509-1970 email: support@FieldServer.com
Appendix D. Error Messages
Message Description Discussion
DAP:#1
FYI. The Map
Descriptor called
<%s> is too short.
The Map Descriptor used to expose driver stats must be
500 elements long. Change the length parameter and
ensure that the Data Array is long enough too
5
DAP:#2
FYI. You could have
used a Map Descriptor
called <%s> to expose
diagnostic info.
This message is for information only and may be
ignored. The driver is capable of exposing performance
and communication statistics. See Appendix D.1 for
more information
DAP:#3
Err. Method3 requires
even number of bytes.
nb= %d Map
Descriptor= <%s>
May be a corrupted message. If frequently occurring,
take a log and report to FieldServer Technical Services.
DAP:#4a
Err. Method3 is
translating invalid
bytes. ch1= %d( dec )
%d( dec )
DAP:#4b
Err: Method2 is
translating invalid
bytes. ch= %d( dec )
%d( dec)
DAP:#4c
Err: Method1 is
translating invalid
bytes. ch= %d( dec )
%d( dec)
DAP:#5
Err. Method3 is
translating invalid
bytes. ch2= %d( dec )
%d( dec )
The protocol only allows certain characters to be
transmitted. If an unexpected character is encountered
then the error message is printed. If the error occurs
frequently the make a log file and report the error to
FST. The error may arise from a corrupted message.
DAP:#6
Err. Invalid Station
(Dec ) %d-%d-%d
Only certain station numbers are legal. (1-260). If the
error occurs frequently then make a log file and report
the error to FST. The error may arise from a corrupted
message.
DAP:#7
Err: Station= %d illegal
- forcing to 1
The CSV file contains a DAP node with an illegal station
number. The driver has changed the illegal node
number to 1. It is important that this error is corrected or
data will be collected from node1.
5
DAP:#8
Err. secondary_port
must be defined.
The DAP driver sends polls on one port and expects
responses on a second port, therefore 2 ports must be
defined for each DAP network – see Section 4.2
5
DAP:#9
FYI. Driver on port=
%d suitable for NON-
Dart applications only.
This message is for information only and may be
ignored. The message indicates that the configuration
is suitable for connection to a DAP only network. No
DART device may be present in the network.
DAP:#10
Err. Invalid
Station#(%d) . (1-260)
The CSV file contains a DAP node with an illegal station
number. Only station numbers between 1 & 260 are
5
Edit the CSV file and reset the FieldServer for the changes to take effect.