Filter
Top Products
freeView IP 800 User’s Manual
16
Step 2
Find a convenient place to put the unit. Its 19” rack mount form factor makes it ideal for mounting
on a 19” rack. When mounting to a rack, attach the included brackets to the sides of the unit.
Take note of the length of your cables so that your computers, KVM Switch, keyboard, mouse
and monitor are distanced properly.
Step 3
Connect the monitor to the KVM Switch. Using the attached cable, or the one included with your
monitor, connect it to the HDDB15-pin female port on the back of the KVM unit labeled with the
monitor symbol at the CONSOLE connector.
Step 4
Connect the keyboard to the KVM Switch. If you have an AT type keyboard, you will need an AT
to PS/2 adapter.
Step 5
Connect the mouse to the KVM Switch.
Step 6
Each PC port connector is HDDB15-pin type. Locate your input cable. It will have an
HDDB15-pin male connector at one end. Plug it into any labeled computer port on the rear of
KVM switch unit. The other end of input cable will have three connectors: a HDDB15-pin male
type for PC video, a Mini Din 6 pin female type for keyboard and a Mini Din 6 pin female type for
mouse, plug these three connectors into the respective ports of the computer. Repeat the same