Freedom9 IP 800 Switch User Manual


 
freeView IP 800 User’s Manual
newer” for MS Windows 2000 or Windows XP, or “Other Operating Systems” for MS Windows NT,
Linux, or OS X. In “MS Windows 2000 or newer” mode the remote mouse is always synchronized
with the local mouse.
Mouse Speed:
Auto mouse speed: Select this option if mouse acceleration is enabled on the host system.
The freeView IP 800 will try to detect the acceleration and speed of the mouse during the
mouse sync process.
Fixed mouse speed: Use a direct translation of mouse movements between the local
mouse and the remote pointer.
A fixed scaling can also be set which determines the number of pixels the remote mouse pointer
is moved when the local mouse pointer is moved by one pixel. This option only works when the
mouse settings on the host are linear (i.e. mouse acceleration is disabled).
6.3.3 Video
Figure 6-8: Video Settings
Miscellaneous Video Settings
Noise filter: This option defines how the freeView IP 800 reacts to small changes in the
video input signal. A large filter setting uses less network traffic and leads to a faster video
display, but small changes in the display may not be recognized and updated on the remote
immediately. A small filter setting displays all changes on the remote host instantly but will
produce more network traffic (depending on the quality of the video input signal). In general,
the default setting should be suitable for most situations.
Force Composite Sync (Required for Sun Computers): To support signal transmission
from a Sun machine, enable this option. If not enabled, the picture of the remote console will
not be visible.
53