Freedom9 IP 800 Switch User Manual


 
freeView IP 800 User’s Manual
60
password is 4 characters.
Confirm Challenge Password: Confirmation of the Challenge Password
Email: The email address of a contact person that is responsible for the unit and its security.
Key length: This is the length of the generated key in bits. 1024 Bits is sufficient for most cases.
Longer keys may result in slower response time of the device during connection establishment.
6.4.5 Serial Port
Figure 6-15: Serial Port
The freeView IP 800’s Serial Settings (Figure 6-15) allows the user to specify what type of device
is connected to the serial port and how to use it.
Configuration or console login: Do not use the serial port for any special function; use it only
for the initial configuration (see
Table 4-1).
Modem: The freeView IP 800 offers remote access using a telephone line in addition to the
standard access over the Ethernet network. The modem needs to be connected to the serial
interface of the freeView IP 800.
A user can connect to the freeView IP 800 using a telephone line the same way that it would
connect to an Internet Service Provider (ISP). By dialing the telephone number of the modem
using third-party modem software on the local computer, the user can connect to the device
through normal telephone lines. The connection is established using the Point-to-Point Protocol
(PPP). Before connecting to the device, ensure that the console computer is configured correctly.
For instance, Windows based operating systems default to PPP for dial-up network connections,
which is correct.