Freedom9 IP 800 Switch User Manual


 
freeView IP 800 User’s Manual
6.4.7 Event Log
Figure 6-17: Event Log
Important events such as a login failure or a firmware update are logged to a selection of logging
destinations (see Figure 6-17). Each of these events belongs to an event group, which can be
selected separately.
List logging enabled: This is the main method to log events. This method uses the internal log
list of the freeView IP 800. To display the log, click on “Event Log” under the “Maintenance” menu.
The number of log entries shown per page can be changed in this section, and the log can also
be cleared by clicking the “Clear” button.
Note: The maximum number of events that can be recorded in the log is 1000. Any entry added
above this will overwrite the oldest entry in the log. Also, if the device is reset through the web
interface, the log information will be stored. However, if the device loses power or a hard reset is
performed, the log will be cleared.
NFS Logging enabled: If this option is selected, the freeView IP 800 will export the log
information to a directory or static link on an NFS server. To write log data from more than one
freeView IP 800 to the same NFS share, a unique file name must be defined for each device.
Once the NFS settings are complete, click the “Apply” button. The NFS share will be mounted
immediately. If the NFS share and the NFS server are not available, an error message will
appear.
63