Filter
Top Products
CONNECT2AIR™ WLAN AP-600RP-USB Page 10 / 62
4 HARDWARE INSTALLATION
4.1 Front Panel
LED indicators
LED Function Color Status Description
PWR Power indication Green On The power is on.
Green On
An active device is connected to the WAN
port.
WAN
Link status
Green Flashing The WAN port is sending or receiving data.
WLAN
Wireless activity Green Flashing
Sending or receiving data via a wireless
link.
On
An active station is connected to the corre-
sponding LAN port.
LAN 1 - 4
Link status Green
Flashing
The corresponding LAN port is sending or
receiving data.
RESET switch
To reset the system settings to factory defaults, please follow the steps:
1. Press the reset button and hold it for more than 10 seconds
2. Release the button
3. After every LED has flashed more than one time and only the LEDs related to a
set connection are lighting, the AccessPoint is active again.
4. It may take up to a minute to reconnect to the clients.
L All changes made to the AccessPoint are lost when the device is reset. Please refer
to Section 8.6.1 “Administrator Toolbox” for details of how to back up your settings.
4.2 Rear Panel
Ports:
Port Description
POWER Power socket: DC 12V, 1.0A (minimum)
WAN The port for connecting your ADSL or cable modem
LAN 1-4 4 switch ports for your networked computers and/or other devices
USB Connector for any printer with a USB interface (Laser, Inkjet, Matrix)
POWER RESET WAN LAN1 LAN2 LAN3 LAN4 USB