Filter
Top Products
CONNECT2AIR™ WLAN AP-600RP-USB Page 18 / 62
6.3 AP-600RP-USB with ADSL Modem
( 1 ) ADSL Modem ( 2 ) AP-600RP-USB ( 3 ) Notebook
No configuration necessary
WAN: PPP over Ethernet
LAN: static IP: 192.168.1.254
DHCP on: 192.168.1.10 - 90
GW: 192.168.1.254
DNS: auto
SSID: CONNECT2AIR
TCP/IP: get IP and DNS
addresses
automatically
SSID: CONNECT2AIR
Data Rate: auto
Connecting the devices to the AP-600RP-USB:
Connect the ADSL Modem to the WAN port, otherwise the PPPoE session cannot be es-
tablished and therefore the Internet service cannot be opened. Additional networking de-
vices like network printers, servers or scanners can be plugged into one of the free LAN
ports and will be integrated in the IP segment of 192.168.1.X.
Installation Note
Most broadband Internet connections are nowadays established over an ADSL Modem.
This case describes using an ADSL modem for connection to the WLAN AccessPoint. The
configuration is quite easy and allows you to share one single Internet connection with
several other Clients.
Important: Please check thoroughly if you have a Modem or a Router in view of the
completely different configurations.
ADSL Modem:
- establishing Internet connection
AP-600RP-USB:
- handling PPPoE session
- DHCP Server
- handling the wireless LAN (WLAN) access
- NAT Routing, Firewall are active
5
4
5
1
2
1
3
4
3