Filter
Top Products
CONNECT2AIR™ WLAN AP-600RP-USB Page 56 / 62
8. The port and printer name will be shown. Choose “Protocol” “LPR” and type in the
“LPR Settings” “WLAN_printing”. Tick “LPR Byte Counting Enabled”. Press OK.
9. Press Finish.
Step 10
Step 11
10. Select the brand and type of your connected printer. If it is not listed, use the CD-
ROM delivered with the device. Press Next.
11. Keep or change the listed printer name and press Next.
Step 12
Step 13
12. Tick “Yes” to have a test page printed and press Next.
13. Press Finish to close the Wizard.
Troubleshooting
L If you cannot print using the default
settings, disable the bidirectional
support in the printer properties
(Ports tab) and try again.
Your Printer
Your Printer
Your Printer