Filter
Top Products
CONNECT2AIR™ WLAN AP-600RP-USB Page 17 / 62
6.2 AP-600RP-USB with ADSL Router (advanced)
( 1 ) ADSL Router
( 2 ) AP-600RP-USB
( 3 ) Notebook
WAN: PPPoE over ADSL
LAN: static IP: 192.168.1.1
DHCP on: 192.168.1.10 - 90
GW: 192.168.1.1
DNS: auto
WAN: dynamic IP address
LAN: static IP: 192.168.4.254
DHCP on: 192.168.4.10 - 90
GW: 192.168.4.254
DNS: auto
Routing: on (cable from Router
connected to the WAN
interface)
SSID: CONNECT2AIR
TCP/IP: get IP and DNS addresses
automatically
SSID: CONNECT2AIR
Data
rate: auto
Connecting the devices to the AP-600RP-USB:
Installation Note
Both the AccessPoint as well as the ADSL Router have routing capabilities. This case de-
scribes using both devices in the router mode in order to have the full feature set of the
AccessPoint active, like the Firewall, NAT or the packet forwarding service.
Important: The IP segment of the ADSL Router has to be different from the one of the
AccessPoint, otherwise the APs Router will not work properly. Due to production process,
the third IP segment of the AccessPoint must be different to 192.168.2.X, as the default
WAN setting for “static IP address” is set to 192.168.2.1 .
ADSL Router:
- DHCP Server (on or off)
- managing the PPPoE session
AP-600RP-USB:
- DHCP Server
- handling the wireless LAN (WLAN) access
- NAT Routing, Firewall are active
5
4
5
1
2
1
3
4
3