Filter
Top Products
106 Operating Manual BX600 S3
4 Gbit FC Pass-Thru Blade Fibre Channel I/O Blades
© cognitas. Gesellschft für Technik-Dokumentation mbH 2009 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx600_s3_ba\BX600S3_en\blade-us.k09
Control and Connection Panel
Figure 53: Fibre Channel pass-thru blade control and connection panel
The following indicator and connection elements are provided:
The following table shows the conditions of the Fibre Channel ports indicated by
the LEDs.
9.4 4 Gbit Fibre Channel Pass-Thru Blade
The 4 Gbit Fibre Channel pass-thru blade features 4 Gbit/sec Fibre Channel
speed. It provides the same control and connection panel as the 2 Gbit Fibre
Channel pass-thru blade, see above.
a Fibre Channel link indicator (amber LED)
b Fibre Channel active indicator (green LED)
c Fibre Channel SFP connector
Slot for Fibre Channel SFP module (see page 107). The slot numbers are assigned to
the server blade slots on the front of the BX600 S3 system (see figure 28 on page 72).
Fibre Channel condition a b
Power ON ON ON
Fibre Channel is online OFF ON
Signal acquired ON OFF
Loss off synchronization Blinks ON
ba
246
13579
810