Filter
Top Products
64 Operating Manual BX600 S3
Updating BX600 System Components Preparation for Use and Operation
© cognitas. Gesellschft für Technik-Dokumentation mbH 2009 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx600_s3_ba\BX600S3_en\blade-us.k05
5.4.3 Updating the Switch Blade Firmware
I Before you update the firmware, you must allocate IP addresses to the
individual switch blades.
Proceed as follows:
Ê Switch on the basic unit and start the management console (Telnet) of the
management blade.
⎜ Console Menu page_root ⎟
⎜ -------------------------------------------------------------------------------- ⎟
⎜ (1) Management Agent ⎟
⎜ (2) Emergency Management Port ⎟
⎜ (3) Console Redirection ⎟
⎜ (4) TFTP upgrade ⎟
⎜ (5) Logout ⎟
⎜ (6) Reboot Management Blade ⎟
⎜ (7) System Information Dump ⎟
⎜ Enter Selection: 3 ⎟
Ê In the management blade console, select the menu item Console Redirection.
⎜ Console Redirection Table page_0. ⎟
⎜ -------------------------------------------------------------------------------- ⎟
⎜ (1) Console Redirect Server Blade ⎟
⎜ (2) Console Redirect Switch Blade ⎟
⎜ (3) Set Return Hotkey , Ctrl+(a character) : 0 ⎟
⎜ Enter selection or type (0) to quit: 2 ⎟
Ê In the Console Redirection Table menu, select the menu item Console Redirect
Switch Blade.