Filter
Top Products
22 Operating Manual BX600 S3
Notes on Safety Important Notes
© cognitas. Gesellschft für Technik-Dokumentation mbH 2009 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx600_s3_ba\BX600S3_en\blade-us.k03
Before Setting Up
V CAUTION!
● During installation and before operating the device, observe the
instructions on environmental conditions for your device in the section
“Technical Data” on page 16.
● If the device is brought in from a cold environment, condensation may
form on both the inside and outside of the machine.
Before operating the device, wait until it is absolutely dry and has
reached approximately the same temperature as the installation site.
Failure to observe these guidelines can lead to physical damage of
the device.
● Transport the device only in the original packaging or in packaging
which protects it from knocks and jolts.
Installation and Operation
V CAUTION!
● For safety reasons, make sure you read any warning labels when
removing modules from the server.
● Beware of energy hazards on the plug-in contacts of the midplane. A
short circuit on these connections can lead to damage to the system.
● If the server is integrated in a (rack) installation that receives power
from an industrial (public) power supply network with the IEC309 con-
nector, the (public) power supply protection must comply with the
requirements for the non-industrial (public) power supply networks for
the type-A connector.
● For the PRIMERGY BX600 S3 unit only 2100W PSUs are allowed
(Product no. A3C40073262)! The 1200W PSUs of the PRIMERGY
BX600 S1 basic unit is not allowed for the PRIMERGY BX600 S3
basic unit.
The 2100W PSU is not allowed for the PRIMERGY BX600 S1 basic
unit.