Filter
Top Products
136 Operating Manual BX600 S3
Power Supply Units Power Supply Concept
© cognitas. Gesellschft für Technik-Dokumentation mbH 2009 Pfad: H:\April\PRIMERGY_Rebranding\von Walter\bx600_s3_ba\BX600S3_en\blade-us.k12
Figure 79: Removing the PSU
Ê Pull the PSU out of the slot.
V CAUTION!
Be careful! The PSU can be very hot!
To mount a PSU follow these instructions in reverse order.
12.2.2 Adding a Power Supply Unit
Depending on the desired configuration, the system can be upgraded with one
or two additional power supply units.
V CAUTION!
● Read the safety information in the chapter “Important Notes” on
page 21.
● All unoccupied PSU slots in the blade server system are fitted with
PSU dummy modules (figure 80) to ensure that the electromagnetic
emission properties of the system are observed and that the system
components are properly cooled.