Filter
Top Products
Changing MENU1 and MENU2 Options
User’s Manual 8-23
SETUP MODE
listed in Table 8-3. Press MENU to select the option and print the
previous item.
5. Exit MENU1 or MENU2.
Press ONLINE to exit the selected function and reprint the
<<FUNCTION>> menu.
6. Either select another function or exit setup mode, saving changes.
To exit setup mode and save changes, check that the yellow arrow
on the print head is positioned beneath SAVE&END. Then press
FONT or MENU.
Important:
To reset MENU1 and MENU2 to their default values, select
DEFAULT. See the section called “Resetting Default Values” on page
8-37 DEFAULT does not reset options handled by HARDWARE,
ADJUST, or CONFIG.
DL6400/6600 Book Page 23 Thursday, September 21, 2000 7:52 PM