Filter
Top Products
User’s Manual 2-1
2
CHAPTER
SETTING UP
THE PRINTER
Setting Up the Printer
The printer is shipped with a stopper and cushion inside that prevent
vibration and other movement that could cause damage during
shipment.
1. Open the top cover and lift out the stopper as shown by the arrow
in the figure.
2. Open the front cover and cut-sheet tray and remove the cushion
from between the tractor shafts.
3. Check that the jam removal lever is locked.
Removing the
Stopper and
Cushion
Top cover
Print head
Stopper
Front cover
Jam removal lever
Cushion
Cut-sheet tray
DL6400/6600 Book Page 1 Thursday, September 21, 2000 7:52 PM