Filter
Top Products
Changing Hardware Options
User’s Manual 8-25
SETUP MODE
<WORD-LG>
8 BIT
7 BIT
To determine the required word length, refer to processor
documentation. Select 8-BIT when printing bit-image
graphics.
8-bit word length. Used by most processors
7-bit word length (MSB = 0).
<BUFFER>
NONE
256BYTE2
2KBYTE2
8KBYTE
24KBYTE
32KBYTE
96KBYTE
128KBYT
Print buffer Download buffer
0 bytes 28K bytes
56 bytes 127.75K bytes
2K bytes 126K bytes
8K bytes 120K bytes
24K bytes 104K bytes
32K bytes 96K bytes
96K bytes 32K bytes
128K bytes 0K bytes
Note:
With 128KB selected, the printer cannot accept any
downloaded font data.
<INTRFCE>
PARALEL
SERIAL
A
UTO-2S
AUTO-4S
AUTO-6S
AUTO-10S
AUTO-15S
AUTO-20S
Selects the type of the interface to the computer.
Centronics parallel interface
RS-232C serial interface
Auto interface selection mode
Both interfaces are ready for communication.
Specify the timing regarding the selected interface as
being inactive.
Serial interface items: The <FORMAT> to <DUPLEX> items are printed only when you select
the RS-232C option for the <INTRFCE> item. Be sure that options selected on the printer
match the operating system or software. Refer to related documentation.
Table 8–4 HARDWRE options (Continued)
HARDWRE item Options Description
DL6400/6600 Book Page 25 Thursday, September 21, 2000 7:52 PM