Filter
Top Products
Changing Print Adjustment Options
User’s Manual 8-31
SETUP MODE
2. Select ADJUST.
Repeatedly press LOCK to position the yellow arrow on the print
head beneath ADJUST. Press FONT or MENU to select ADJUST
and print the <CNT-ORG> options.
3. Select an option from 1/6 IN to 66/6 IN.
Press LOCK to move the yellow arrow on the print head to the
appropriate option. Press FONT to select the option. The
<CNTFINE> item is then printed. If the top-of-form must be fine-
adjusted, do so now. Otherwise, go to step 4.
4. Exit ADJUST.
Press ONLINE to exit ADJUST and reprint the
<<FUNCTION>> menu.
5. Exit setup mode, saving the top-of-form setting.
Make sure that the yellow arrow is positioned beneath
SAVE&END. Then press FONT or MENU.
6. Check the top-of-form setting.
Load paper and print a sample page using software to check
adjustment. If necessary, reenter setup mode and fine-adjust the
top-of-form by changing the <CNTFINE> option.
<CNT-ORG> 1/6IN 2/6IN 3/6IN 4/6IN 5/6IN 6/6IN 7/6IN 8/6IN 9/6IN
10/6IN 11/6IN ....
DL6400/6600 Book Page 31 Thursday, September 21, 2000 7:52 PM