Filter
Top Products
181
- Appendix A: WLAN User’s Guide
3 Click the [Sharing] tab.
4 Click [Share this printer].
5 Enter the sharing printer name in [Share name].
6 Click the [OK] button.
Confirming connection
After you have finished the network setup operations, access the folder whose sharing has been set for
other personal computers. Also, confirm the status of the radio waves in case of trouble such as a
network connection failure.
Connecting your personal computer to another personal computer
1 Click [Start] first and then [My Computer]. The [My Computer] window will be displayed in the left frame.
2 Click [My Network Places] in the “Other Places” list. The window [My Network Places] will be displayed.
3 Click [View workgroup computers] under Network Tasks in the left frame.
4 Double-click the personal computer to which your personal computer is to be connected. The folder that was
specified in
“Setting the file-sharing function” on page 180 will be displayed.
5 Double-click the folder to be accessed.
Confirming the status of the radio
1 Right-click the Intel PRO Wireless icon in the lower right corner of the screen.
Setting the printer-sharing function when Network Setup Wizard has been executed is suggested on the screen.
For the wireless LAN, however, since security is guaranteed by entry of the network name (SSID) and the
network key, the steps to be taken to set the printer-sharing function without using Network Setup Wizard are
laid down below.
In the case of access point (infrastructure) connection, enter the necessary data for the access point before
confirming connection. Refer to the manual of the access point for the access point setup procedure.