Filter
Top Products
xii
Do not install the device on unstable surfaces.
Make sure that the device is installed on a flat, level surface and that none of its parts
extend beyond the surface top, such as a desk or table. Do not install the device on
unstable surfaces. Install the device on a level surface that is free of vibration to
prevent it from falling.
Install the device on a strong surface that will support the weight of the device and
other devices.
Do not place heavy objects or stand on top of the device.
Do not place heavy objects on the device or use the device's surface top to perform
other work. Improper installation might cause injuries and equipment failure.
Firmly insert the power plug.
Firmly insert the power plug as far it can go into the power outlet.
Do not use the device immediately after moving it from a cold
place into a warm room.
Do not use the device immediately after moving it from a cold place into a warm room.
Condensation may occur, which might lead to operating errors. Let the device dry
about one or two hours before you use it.
Before moving the device, disconnect the power plug from the
power outlet.
Do not move the device with the power and any other cable connected as this can
damage the cables, which can later cause fire, electric shock as well as injury.
Before moving the device, be sure to disconnect the power plug from the power
outlet, and all other cables. Make sure that the floor is free of any obstructions.
Protect the device from static electricity.
Install the device away from strong magnetic fields and other sources of electronic
noise. Also, protect the device against any static electricity, which can cause the
device to malfunction.