Filter
Top Products
Chapter 1 Preparations
IP-9610
4
Hardware option Maximum
installation
Description
SDI input board
SDI output board
4
Installed according to the number of SDI inputs/outputs.
Combining two SDI input boards or two SDI output boards
enables support for dual-link SDI.
Codec board (*1) 2
A codec board is always installed in the base equipment. Installing
one additional board enables the following operation modes (*3):
Encoder x 2
Decoder x 2
Encoder x 1 and Decoder x 1
Decoder x 1 and Encoder x 1
Audio board (*2) 2
With a Codec Board, this board enables support of the 16 channel
s audio (stereo pairs of 8 channels) function.
*1 The codec board has an 8 channel audio function.
*2 If two codec boards are installed, an audio board must be added to each of these codec boards
(two audio boards must be added).
*3 For details on combinations of operation modes and the AV input-output interfaces, refer
Appendix 5 AV Interface Settings the IP-9610 Software User's Guide.
It is necessary to install a software license (encoder license or decoder license) by operation
mode. For example, operation mode [Encoderx2] requires two encoder licenses.