Filter
Top Products
Chapter 3 Operation instructions
IP-9610
33
3.3 Device Settings and Operation
(Front Panel)
The IP-9610 has six control keys: [U], [V], [Y], [Z], [Enter], [Cancel], [F1], [F2], [F3] and [F4].
Use these keys for making settings.
The VFD panel displays of 4 lines, 24 characters per line.
See Software User’s Guide for the procedure of the software installation and the each setting.
Front Control Panel
■Function description of each key
Functions of [U] and [V] keys
- Each key changes the menu items or setting items displayed on the VFD panel.
- The displayed item changes each time either key is pressed. [U] and [V] change items in
the opposite direction.
Functions of [Y] and [Z] keys
- Each key moves the cursor displayed on the VFD panel to the left or right.
- The cursor moves one column each time either key is pressed.
[Enter] key
- Pressing the [Enter] key while the maintenance initial page is displayed proceeds to the
maintenance menu page.
- Pressing the [Enter] key on the maintenance menu page allows you to make settings for status
display and shutdown.
[Cancel] key
- Pressing the [Cancel] key while the maintenance menu page is displayed proceeds to the
maintenance initial page. Pressing the [Cancel] key on the setting item selection page returns to
the page displayed immediately before you pressed the [Enter] key.
[F1]～[F4] key
- Short cut key to any menu location. By pressing the [F1]～[F4] key, menu location can be changed
to registered location. By pressing the [F1]～[F4] key for a while under the menu location that
customer want to register, that menu location will be registered.
Other
- If you do not make any key input for 60 seconds on any page, the current page proceeds to the
maintenance initial page.
3.3