Filter
Top Products
Appendix
IP-9610
61
LED name ON Blinking OFF Remarks
PWR G Power ON --- Power OFF
G Normal operation Starting up RDY
O
Maintenance mode
LAN1
(IP=10.0.0.1)
LAN2
(IP=10.0.0.2)
CONSOLE
(IP=192.168.255.253)
Maintenance mode
starting up
Software inactive Blink interval: 0.5s
Maintenance mode
(Cancel button
startup):
LAN subnet mask
(255.0.0.0)
CONSOLE subnet
mask
(255.255.255.252)
ALM R Equipment alarm Equipment alarm Normal operation When the device
alarm is generated, a
part of alarm can be
changed to lighting,
blinking, and turning
off by the setting.
IN DWN O Video/Audio/Network
input down/fault
Video/Audio/Network
input down/fault
Normal operation
The alarm display by
this LED can select
lighting, blinking,
and turning off
excluding the LED
lighting by the
temperature anomaly.
LINK/ACT
[LAN1]
G LINK established LAN packets detection Cable disconnection
100M/1000M
[LAN1]
G 100BASE operation 1000BASE operation 10BASE operation
LINK/ACT
[LAN2]
G LINK established LAN packets detection Cable disconnection
100M/1000M
[LAN2]
G 100BASE operation 1000BASE operation 10BASE operation
LINK/ACT
[CONSOLE]
G LINK established LAN packets detection Cable disconnection
100M/1000M
[CONSOLE]
G 100BASE operation 1000BASE operation 10BASE operation
G: Green, O: Orange, R: Red
Name Button type Specifications Behavior
POWER Locker button Power ON/OFF