Filter
Top Products
Chapter 4 Cable specifications
IP-9610
37
4.1 Installation Preparations
A type of IP-961 0 installation work is shown below.
When constructing a system that uses IP-9610, consideration must be given so that its boundary
between IP-9610 and other devices is similar to that shown in the above figure. Since the type of work
may change depending on the system, procure equipment and perform work based on consultations
with a system designer.
(12) Power cable
IP-9610 External device
D-sub9
(6) RS-232C cable
RJ25
(8)Audio adapter cable XLR
XLR
(9) LAN cable
RJ45
(10) LAN cable
RJ45
Power source 100-240VAC
Device with RS-232C interface
Analog audio output device
(mic, etc)
Analog audio input device
(speaker, etc)
Device with LAN interface (HUB, etc)
Device with LAN interface (HUB, etc)
Cables are depended on the option board.
Please refer user's guide of each option board.
RJ45
(11) LAN cable
Device with LAN interface (HUB, etc)
(4) Coaxial cable
BNC
(5) Coaxial cable
BNC
Reference clock source
D-sub9
(7) RS-232C cable
Device with RS-232C interface
(2) Coaxial cable
BNC
(1) Coaxial cable
BNC
DVB-ASI output device
DVB-ASI input device
(3) Coaxial cable
BNC
DVB-ASI input device
Reference clock source
(separate order)
4.1