Filter
Top Products
Chapter 2 Installation and Connection
IP-9610
23
2.4 Connection to DVB-ASI Device
This section describes how to connect with the DVB-ASI device.
2.4.1 Connection to DVB-ASI Input Device
When IP-9610 operates with the encoder mode, the BNC cable is connected to DVB-ASI OUT as
shown in the figure below.
For details about connectors and cables, see Section 4.2, “Cable and Connector Details.”
For electrical specifications, see
Appendix 2.3, “Function Specifications.”
Figure Connection to DVB-ASI input device
1
2
3
4
ＤＶＢ－ＡＳＩ input device
2.4
NOTE: