Filter
Top Products
Chapter 2 Installation and Connection
IP-9610
25
2.5 Connection to RS-232C/RS-422
Device
The [SERIAL] connector of IP-9610 is the RS-232C or RS-422 communication terminal (switchable).
The terminal of IP-9610 is the D-sub 9 pins (male) . The specification of RS-232C operating mode is
DTE. Use a cross connection or straight cable corresponding to the connected device. See Section 4.2,
“Cable and Connector Details.”
The figure below shows the connection method.
For details about connectors and cables, see Section 4.2, “Cable and Connector Details.”
For electrical specifications, see Appendix 2.3, “Function Specifications.”
Figure Connection to RS-232C or RS-422 input/output device
2.5
NOTE: