Filter
Top Products
Chapter 2 Installation and Connection
IP-9610
22
2.3 Connection to External Sync(REF)
There is each of input and output interfaces for connection to the external sync (REF).
REF input
Connect incoming external sync to REF IN by using coaxial cable with BNC connector. The signal
is terminated in 75 ohm.
REF OUT
Connect coaxial cable with BNC connector to REF OUT for outgoing external sync signal. The
signal is output in 75 ohm.
For details about connectors and
cables, see Section 4.2, “Cable and Connector
Details.” For electrical specifications, see Appendix 2.3, “Function Specifications.”
Figure Connection to External Sync input, output devices
NOTE:
2.3