Fujitsu M3099GH Scanner User Manual


 
6-5
13 In Screen 1, press
Mode 1
11 times to
display INK RESET screen. <Screen 12>
14 Press
Mode 2
to display Screen 13. If you
want to reset the counter, press
Mode 2
.
And you can see Screen 14 for 3 seconds.
If you do not want it, press
Mode 1
to go
Screen 12.
Go to 7 to close the job.
<Screen 13>
How to test the printing using the operator panel
You can check the print result as follows:
How to reset the print head life counter
You must reset the print head life counter when you replace the print head.
<Screen 12>
<Screen 14>
<Screen 15>
<< C
M
ODEE
>
>
T
E
S
T
x x : S T A
R
T
15 Turn the endorser on by following the
procedure of “page 6-2, How to set the
endorser ON (or OFF)”.
16 Turn the power of the scanner on while
pressing
Mode 2
. The LCD displays MAIN-
TENANCE MODE initial screen.
<Screen 15>
17 Press
Mode 2
once, then press
Mode 1
once.
Place a document on the stacker, then
press
Start
.
NOTE
• The scanner prints 5-digit numbers counting in increment of one from the
initial number.
• Before pressing
Start
you can set the document size, resolution and so
on (See Chapter 3).
RE
S
ET
i
n
ish
F
!
!
INK
R
E
SET
N
o-
M
o
de1
Y
e
-
M
o
de2
s
<
>
<
>
SE
T
U P M O D
E
INK
R
E
SET
13-Chap. (6) 98.2.20, 10:55 AM5