Fujitsu M3099GH Scanner User Manual


 
7-12
Setting Product-ID (M3099GX
/
GH)
When you set Product-ID, you must set as follows:
<Screen 28>
<Screen 29>
<Screen 30>
<Screen 31>
(Blinking)
1 In Screen 2, press
Mode 1
13 times to display
PRODUCT-ID SET screen. <Screen 28>
2 Press
Mode 2
to display Screen 29.
(The default setting is “M3099GH” in case of
M3099GH and “M3099G”in case of
M3099GX.)
3 In Screen 29, press
Mode 1
to select Product-
ID. Each time
Mode 1
is pressed, M3099G,
M3099GH or M3096G apear in case of
M3099GH, and M3099G or M3096G at each
time you press
Mode 1
in case of M3099GX.
4 Press
Mode 2
to display Screen 28.
The settings are stored in EEPROM.
5 When you close the setup mode, press
Stop
.
When you set the picking start time, you must set as follows:
Setting picking start time
1 In Screen 2, press
Mode 1
13 times (14 times
for M3099GX/GH) to display PICK START
TIMER screen. <Screen 30 >
2 Press
Mode 2
to display Screen 31.
(The default setting is 1 second.)
3 In Screen 31, press
Mode 1
until the digit you
want to change blinks. Then press
Mode 2
until the value you want to select appears.
(The selectable range is from 0.2 to 29.8
seconds in steps of 0.2 seconds.)
4 Press
Mode 1
and
Mode 2
at the same time to
display Screen 30.
The settings are stored in EEPROM.
5 When you close the setup mode, press
Stop
.
<
>
<
>
SE
T
U P M O D
E
RP
O
D
U
E
C
T
-
ID
S
T
X
XX
X
X
X
RP
O
D
U
E
C
T
-
ID
S
T
<
>
<
>
SE
T
U P M O D
E
CIP
KS
M
T
A
R
TT
I
ER
XX
.
XS
CIP
KS
M
T
A
R
TT
I
ER
15-Chap. (7) 98.2.20, 10:58 AM12