Fujitsu M3099GH Scanner User Manual


 
7-11
S
C
I
-I
DSEST
5
Setting RS-232C transfer rate (M3099EX
/
EH)
When you set RS-232C transfer rate, you must set as follows:
Setting SCSI-ID (M3099GX/GH)
1 In Screen 2, press
Mode 1
12 times to
display SCSI-ID SET screen.
<Screen 26 >
2 Press
Mode 2
to display Screen 27.
(The default setting is “5”.)
3 In Screen 27, press
Mode 1
to change
SCSI-ID. Each time
Mode 1
is pressed,
SCSI-ID changed from 0 to 7.
4 Press
Mode 2
to display Screen 26.
The settings are stored in EEPROM.
5 When you close the setup mode, press
Stop
.
1 In Screen 2, press
Mode 1
12 times to
display RS-232C BAUD screen.
<Screen 24>
2 Press
Mode 2
to display Screen 25.
(The default setting is 4800 bps.)
3 In Screen 25, press
Mode 1
until the rate
you want to select blinks.
4 Press
Mode 2
to display Screen 24.
The settings are stored in EEPROM.
5 When you close the setup mode, press
Stop
.
When you set the picking start time, you must set as follows:
<Screen 24>
<Screen 25>
<Screen 27>
<Screen 26>
(Blinking)
<
>
<
>
SE
T
U P M O D
E
RS
2
2
C
B
A
UD3
<
>
<
>
SE
T
U P M O D
E
0069
:48
:
0
0
:
240
0
1200
<
>
<
>
SE
T
U P M O D
E
S
C
I
-I
DSEST
15-Chap. (7) 98.2.20, 10:57 AM11