Filter
Top Products
C141-E134-01EN IN-3
M
maintenance level 6-8
maintenance requirement 6-6
MAN series model name and product number
D-2
MC model 4-19, A-2
MC model outer view 1-5
microcode downloading 1-5
model name and part number 2-1
model name and product number D-1, D-2
MODE SELECT/MODE SELECT
EXTENDED command 5-16
mode setting 5-9
motor start mode 5-8
motor start mode setting 5-8
mounting 4-4
mounting drive 5-10
mounting frame structure 4-5
mounting procedure 5-10
mounting requirement 4-1
MP model 4-11, 5-7, A-3
MP model only 4-21
MP model outer view 1-6
MTBF 2-5
MTTR 2-6
N
noise filter 4-10
notes on handling drive 5-1
notes on mounting 4-4
O
online self-diagnostics 6-3
operation check 6-12
operation test 6-12
other 4-7
outline 8-1
output signal 4-16
output signal for external LED 4-17
P
packaging 5-2
PAD 3-9
page code=1 5-19
page code=2 5-20
page code=3 5-17
page code=7 5-19
parts replacement 6-8
parts that can be replaced in field 6-7
physical sector allocation 3-5
PLO Sync 3-8
positioning error rate 2-5
power cable 4-21
powering-on 5-12
power on/off sequence 4-8, 4-9
power-on sequence 8-5
power supply connector 4-11, 4-12
power supply requirement 4-8
power supply to SCSI terminating
resistor 4-10
precaution 6-5
preventive maintenance 6-6
principle of operation 8-1
programmable data block length 1-4
programmable multi-segment data
buffer 1-3
R
random/sequential read test 6-5
read-ahead cache feature 1-3
read-write circuit 1-7, 8-3
read/write circuit 8-7
read/write error recovery parameter 5-19
recommended component for
connection 4-21
reliability 2-5
reporting result of self-diagnostics and error
indication 6-3
reserve and release function 1-3
reserved 4-16
revision label 6-9
revision number 6-9
S
SCA2 type LVD C-2
SCA2 type SCSI connector 4-20
SCA2 type SCSI model 4-19,
SCSI bus 6-5
SCSI bus configuration 1-9
SCSI bus connection 5-4,
SCSI cable 4-21
SCSI cable connection 4-18
SCSI connector 4-11, C-2, C-3
SCSI connector and power supply
connector 4-11, 4-19
SCSI connector signal allocation C-2, C-3
SCSI function specification 2-7
SCSI ID setting 5-6, 5-7
SCSI interface error 7-4
SCSI standard 1-2
sector format 3-7
seek test 6-2
self-diagnostics 6-1
SEND DIAGNOSTIC command 6-3
sense data 7-1, 7-4