Filter
Top Products
C141-E134-01EN4 - 12
Figure 4.14 16-bit SCSI interface connector
b. Power supply connector
Figure 4.15 shows the shape and the terminal arrangement of the output connector of DC
power supply.
Figure 4.15 Power supply connector (16-bit SCSI model)
(3) SG terminal
The IDD is not provided with an SG terminal (fasten tab) for DC grounding. Therefore, when
connecting SG and FG in the system, use the +5 VDC RETURN (ground) inside the power supply
connector as the SG on the power supply side.
The tolerance is ±0.127 mm
(
0.005 inch
)
unless otherwise s
p
ecified