Fujitsu P2WW-2300-01ENZ0 Scanner User Manual


 
40
How to interpret the Log
The results of conversion are displayed as follows:
Date = Date and time of conversion
File = Name of the file conversion performed
Path = Path to save the file
Result = Conversion result
Cause = The cause of failure (It is show when the Result is NG or except)
Result” will be one of the following:
OK:
PDF conversion is complete without problem.
NG:
PDF conversion failed.
except:
The file is not targeted for PDF conversion.
canceled:
Conversion was canceled halfway through.
Cause” will be one of the following:
If Result” is “NG
file not found:
The PDF file is not found. Before retrying conversion,
ensure that the file displayed after “File=” exists in the
folder displayed after “Path=”.
under file use:
The file is used by another application and conversion to
searchable PDF failed. Ensure that the file is available
before retrying conversion.
file open error:
The file cannot be opened because it is being used by
another application or access is not permitted. Ensure that
the file is available and you have the access right before
retrying conversion.
file access failure:
The file cannot be accessed or opened because it is being
used by another application or access is not permitted.
Ensure that the file is available and you have the access
right before retrying conversion.
OCR error:
A problem occurred during conversion to searchable PDF.
Retry conversion.
out of memory:
Conversion failed due to insufficient memory. Exit all
programs you are not using before retrying conversion. If
still errors occur, install additional memory.
disk full:
There is not enough space in the disk drive in which the
folder including PDF files, the user’s [Temp] folder, or the
user’s profile exists. Delete unnecessary files or do
something to secure enough disk space before retrying
conversion.
error:
An internal error occurred. Retry conversion.