Fujitsu P3PC-2022-02ENZ0 Scanner User Manual


 
3.1 How to Scan Business Cards
CardMinder User’s Guide 20
Scanning and Exporting Business Card Data
3
10. Specify desired "Capturing Side/Color Mode/Resolution" settings for scanning.
11. When the configuration is finished, click the [OK] button to close the [Scanner set-
tings] window.
12. Click the [Scan] button on the toolbar.
When the scanning is complete, the scanned images of the business cards are displayed
on the [Inbox] tab of the main screen.
Capturing Side: If the business card is a one-sided one, select "Simplex." If it is a
two-sided one, select "Duplex." When two-sided cards are
scanned, back sides are scanned after front sides have been
scanned.
When the message below appears, turn over the business card,
and click the [OK] button.
If you click the [Cancel] button, scanning mode is switched to
Simplex.
Color Mode: Specify the color mode, "B&W" (Black & White) or "Color."
Resolution: Specify the resolution to be used.
TWAIN scanners:
150, 200, 300, and 400dpi.
Scanning in color mode: "Best" or 300dpi is recommended.
Scanning in B&W mode: "Best" or 400dpi is recommended.
ATTENTION
You may see the scanner driver dialog box (TWAIN dialog box) when scanning
business cards.
If this is the case, specify the following and proceed with operation.
Recommended resolution
Color mode: 300 dpi
B&W mode: 400 dpi
Paper size
Flatbed: A4