1.2 GigabitEthernet card Specifications
1.2 GigabitEthernet card Specifications
The FUJITSU PCI GigabitEthernet card is an adapter that is installed into a PCI slot or
a PCI Express slot.
1.2.1 Specifications
The specification of the FUJITSU PCI GigabitEthernet adapter is listed in "Table 1.2.1
PCI GigabitEthernet Card Specification" and "Table 1.2.2 PCI Express GigabitEthernet Card
Specification".
Table 1.2.1 PCI GigabitEthernet Card Specification
Item Compatibility
Host Bus Interface PCI Local Bus Revision 2.1 or later
Network Interface
1000Base-SX (PW008GE4, PW0G8GE1)
10/100/1000Base-T (PW008GE5, PW0G8GE2, PRIMEPOWER250/450 secondary
LAN)
10/100/1000Base-T * 4ports(PW008QG1)
Host Data Transfer 32/64-bit Bus Mastering DMA Transfers
Bus Type One PCI slot per card.
Power Requirements Maximum: 4.7W(PW008GE4/5, PW0G8GE1/2), 14.0W(PW008QG1)
Connections
1000Base-SX (P008GE4, PW0G8GE1): Multi-mode Fibre (62.5/125 micron)
SC-Duplex
10/100/1000Base-T (PW008GE5, PW0G8GE2, PRIMEPOWER250/450 secondary
LAN, PW008QG1): Cat5e Cable (Cat5 cable can also be used for
10/100Mbps.)
Table 1.2.2 PCI Express GigabitEthernet Card Specification
Item Compatibility
Host Bus Interface
PCI Express 1.0a (SE0X7GD1X, SE0X7GD2X)
PCI Express 1.1 (SE0X7GQ1X)
Network Interface
1000Base-SX * 2ports (SE0X7GD2X)
10/100/1000Base-T * 2ports (SE0X7GD1X)
10/100/1000Base-T * 4ports (SE0X7GQ1X)
Host Data Transfer
SE0X7GD1X, SE0X7GD2X: PCI Express 4lane Bus Mastering DMA Transfers
SE0X7GQ1X: PCI Express 8lane Bus Mastering DMA Transfers
Bus Type One PCI slot per card.
Power Requirements Maximum: 9.1W(SE0X7GD1X), 9.2W(SE0X7GD2X), 15.0W(SE0X7GQ1X)
Connections
1000Base-SX(SE0X7GD2X):
Multi-mode Fibre
(LC-SC: 62.5/125 micron and 50/125 micron
(A card side is LC. It is used when connection place partner
equipment is SC.),
LC-LC: 62.5/125 micron and 50/125 micron)
10/100/1000Base-T (SE0X7GD1X, SE0X7GQ1X):
Cat5e Cable (Cat5 cable can also be used for 10/100Mbps.)
● PW008GE4, PW0G8GE1 and SE0X7GD2X only supports full duplex connection. Half-duplex
3