Filter
Top Products
Chapter 4 LinkAggregation Feature
- Description
Inactivate the LinkAggregation group.
- Exit code
0 : normal end.
>0 : error end.
- Example
Inactivate the LinkAggregation group with aggregator-interface = fjgi0.
# /etc/opt/FJSVla/bin/fjla term fjgi0
# FJ LinkAggregation stop.
● When aggregator-interface is inactivated (unplumb), it cannot perform that fjla term
if not specify aggregator-interface name. In this case, please specify
aggregator-interface name.
4.2.2.3 Display Status and Statistics (fjla stat)
This section explains the fjla stat command for displaying the LinkAggregation status and
statistic.
- Synopsis
/etc/opt/FJSVla/bin/fjla stat [
aggregator-interface
] [-i
interval
]
aggregator-interface
: Aggregator interface name (including instance number)
-i
interval (s)
: Specify the display interval in seconds (maximum:4294967295). The command
displays the statistics during the specified period. However, the first report shows
statistics accumulated since the group is activated.
If
aggregator-interface
is not specified, information for all LinkAggregation groups will
be displayed. If
interval
is not specified (or "-i 0" is specified), the command only shows
the first report.
- Description
Display the status and statistics of specified aggregator-interface.
- Exit code
0 :normal end.
>0 :error end.
54