Filter
Top Products
Chapter 3 Setting Configuration Information
parameter status meaning
link_status Read only
0 : Link down
1 : Link up
link_speed Read only
1000 : 1000Mbps
100 : 100Mbps
10 : 10Mbps
link_mode Read only
0 : Half Duplex communication
1 : Full Duplex communication
autonego Read only
0 : Auto-Negotiation is Off.
1 : Auto-Negotiation is On.
flow_control Read only
0 : None (flow_control disabled)
1 : LocSend (Can transmit pause frame only)
2 : Rem (Can receive pause frame only)
3 : Sym (Can receive and transmit pause frame)
cardtype Read only
0 : SX (PW008GE4/PW0G8GE1/SE0X7GD2X)
1 : T (PW008GE5/PW0G8GE2/SE0X7GD1X/
PW008QG1/SE0X7GQ1X,
PRIMEPOWER250/450 secondary LAN port)
instance Read and write Instance Number
adv_10fdx_cap Read and write
10Mbps/FullDuplex Setting
0 : Invalid
1 : Valid (Default)
adv_10hdx_cap Read and write
10Mbps/HalfDuplex Setting
0 : Invalid
1 : Valid (Default)
adv_100fdx_cap Read and write
100Mbps/FullDuplex Setting
0 : Invalid
1 : Valid (Default)
adv_100hdx_cap Read and write
100Mbps/HalfDuplex Setting
0 : Invalid
1 : Valid (Default)
adv_1000fdx_cap Read and write
1000Mbps/FullDuplex Setting
0 : Invalid
1 : Valid (Default)
adv_1000hdx_cap Read and write
1000Mbps/HalfDuplex Setting
0 : Invalid
1 : Valid (Default)
adv_pauseTX Read and write
Transmit Pause Frame Setting
0 : Invalid
1 : Valid (Default)
adv_pauseRX Read and write
Receive Pause Frame Setting
0 : Invalid
1 : Valid (Default)
adv_autoneg_cap Read and write
Auto-Negotiation Setting
0 : Auto-Negotiation Off (Fixed mode)
1 : Auto-Negotiation On (Default)
adv_role_cap Read and write
Role Setting (Not valid for
PW008GE4/PW0G8GE1/SE0X7GD2X)
0 : Slave
1 : Master
2 : Auto (Default)
34