Filter
Top Products
28
Chapter 4: Installing Components
www.gateway.com
Opening the server case
Because the components inside your server are extremely sensitive to static
electricity, make sure that you follow the instructions at the beginning of this
chapter to avoid static electricity damage.
To open the server case:
1 Follow the instructions in “Preventing static electricity discharge” on
page 27.
2 Turn off the server, then unplug the power cords and all other cables
connected to the server.
Warning For correct cooling and air flow, always reinstall the side
panel and the air duct (if included) before you turn on the
server. Operating the server without the cover in place can
damage server components.
Warning This server has two power cords. To disconnect internal
AC power, you must unplug both power cords.