Filter
Top Products
34
Chapter 4: Installing Components
www.gateway.com
Installing drives
Your server’s basic configuration includes one CD drive and one 3.5-inch
diskette drive. Your server also has two additional 5.25-inch drive bays.
Your server can have up to eight SCSI hard drives in the hot-swap bay behind
the front access door.
As you prepare to install drives, remember:
■ Do not use the top 5.25-inch drive bay for drives which have electronic
components exposed on the top. Drive mounting rails at the top of the
bay may damage any exposed electronic components.
■ Before you install a drive, see the drive’s documentation for information
on configuring the drive, setting drive jumpers, and attaching cables.
■ IDE hard drives can be configured as single, master, slave, or cable-select.
IDE CD drives can be configured as master, slave, or cable-select.
5.25-inch drive bay
CD drive
Diskette drive
5.25-inch drive bay
Hot-swap
bays