Filter
Top Products
42
Chapter 4: Installing Components
www.gateway.com
Installing a SCSI hard drive
Use this procedure to add or replace hard drives in the hot-swap bay. Your server
supports up to eight 1-inch high 3.5-inch SCA SCSI hard drives. You can
purchase additional SCSI drives through your Gateway sales representative.
To install a hard drive:
1 Unlock the front cover’s lock, then swing the hot-swap bay door open.
Important The numbers on the left side of the hot-swap bay identify
the SCSI ID of each drive. Install the topmost drives first.
Gateway tests and verifies the operation and compatibility
of the drives it sells. Especially in a hot-swap or
mission-critical environment, additional or replacement
drives must conform to Gateway standards.
Hot-swap
bays