Filter
Top Products
43
Installing drives
www.gateway.com
2 If a drive has failed, determine which drive has failed by running storage
console software. Match the software’s SCSI ID for the failed drive with
the SCSI ID number to the left of the hot-swap bays.
3 Pull the drive tray’s lever away from the server, then pull the tray straight
out of the server.
4 If you are replacing a hard drive, remove the four screws that secure the
hard drive to the drive tray, then remove the drive from the tray.
- OR -
Caution Before you remove a failed drive, use the appropriate
software and utilities installed on the server to stop all
activity on the failed drive. Instructions for using the
software are provided by the software manufacturer.
Failure to do so may destroy the data on the drive.
Screw
Screw
Screw
Screw