Filter
Top Products
84
Chapter 6: Troubleshooting
www.gateway.com
Invalid partition table
■ The master boot record may be corrupt. For troubleshooting information,
see “The master boot record is corrupted” on page 91.
Invalid password
■ Enter your password again. Some passwords are case sensitive.
■ If you do not know the password, you may need to reinstall the software
you are trying to access.
■ System startup passwords are stored in BIOS. If this password has been set
and you do not know it, you may be able to reset the password through
system board jumper settings. For more information, see “Resetting BIOS
passwords” on page 79.
Memory errors were detected while the system started up
■ See “Memory errors were detected during server start up” on page 92 for
a possible solution.
Memory size error
■ Restart your server, then open the BIOS Setup utility by pressing and
holding F2 while your server restarts. Save the memory configuration.
Missing operating system
■ The master boot record may be corrupt. For troubleshooting information,
see “The master boot record is corrupted” on page 91.
System Event Log Full
■ Clear the event log. To clear or view the event log, restart your server, then
open the BIOS Setup utility by pressing and holding F2 while your server
restarts. Select the
Advanced menu, then select the Event Log Control menu.